Zte ZXR10 5900E Series - Configuring TOPN; Setting Aging Time of Inactive Stream; Setting NM Server Address and L4 Port ID; Setting Sampling Rate

ZXR105900ESeriesUserManual(EthernetSwitchingVolume)
SettingAgingTimeofInactiveStream
CommandFunctions
ZXR10(config)#ipstreamcachetimeoutinactive<numb
er>
Thissetsagingtimeofinactive
stream.
Ifdataofaowarenotupdatedwithinthespeciedtime,the
aginginformationwillbenotiedtostreamrecord,inseconds,15
secondsbydefault.
SettingSamplingRate
St-
ep
CommandFunctions
1
ZXR10(config)#interface<interface-name>Thisentersinterface
congurationmode.
2
ZXR10(config-if)#netflow-sample-rate{ingress|
egress}
Thiscongurespacket
number-basedIPFIXsampling
rate.
SettingNMServerAddressandL4PortID
CommandFunctions
ZXR10(config)#ipstreamexportdestination
<ip-address>udp-port
Thissetstheaddressandportid
ofNMserver ,towhichpackets
aresent.
SettingSourceAddressforNetworkDevice
SendingPackets
CommandFunctions
ZXR10(config)#ipstreamexportsource<ip-address>
Thissetssourceaddressfor
networkdevicesendingpackets.
ConfiguringTOPN
CommandFunctions
ZXR10(config)#ipstreamtopnNsort-by{bytes|packets}Thissetssizeandsorting
behaviorofTOPN(bypacket
numberorbytenumber).
132CondentialandProprietaryInformationofZTECORPORATION