Zte ZXR10 5900E Series - Configuring Preup Time; Configuring ZESS Mode

Chapter7ZESSConguration
Parameter
Description
<1-600>
Preforwardvalue,theunitissecond.Whenthedisconnected
portreconnects,waitforpreforwardtimeandopen
automaticallyunlesshasZESRprotocolconguration.The
defaultvalueis10seconds.
<primary-interface-name><s
econdary-interface-name>
TwoportsofZESS.Innormalcases,secondaryportisblock,
whichavoidsformingstorm.
Example
1.Createzessnodethatdomainis1,protect-instanceis1,ports
aregei_1/10andgei_1/20.
ZXR10(config)#zessdomain1protect-instance1
primarygei_1/10secondarygei_1/20
2.Thisdeleteszessthatdomainis1.
ZXR10(config)#nozessdomain1
ConfiguringPreupTime
Tocongurepreuptimeofzessnode,usethefollowingcommand.
CommandFunction
ZXR10(config)#zessdomain<1-4>preup<1-600>
Thedefaultpreuptimeis5
seconds.
ParamtersDescription
Parameter
Description
<1-600>
Preupvalue,theunitissecond.AfterZESSdetectsthatlink
recovers,itdoesn'tswitchstatequicklyuntildelayingpreup
time.Thedefaultvalueis5seconds.
Example
Thisexampleshowshowtoconguredomain1preuptimeas10
seconds.
ZXR10(config)#zessdomain1preup10
ConfiguringZESSMode
TocongureZESSmodeasinversionornon-inversionmode,use
thefollowingcommand.
CommandFunction
ZXR10(config)#zessdomain<1-4>mode{revertive|
non_revertive}
ThisconguresZESSmode
asinversionornon-inversion
mode.
CondentialandProprietaryInformationofZTECORPORATION69