Zte ZXR10 5900E Series - Adding Ports to a VLAN in Batches; Setting the Native VLAN for a Trunk or Hybrid Port; Setting VLAN Filtering on a Port

ZXR105900ESeriesUserManual(EthernetSwitchingVolume)
�ToaddahybridportintoaspecicVLAN,usethefollowing
commands.
CommandFunction
ZXR10(config-gei_1/x)#switchporthybridvlan
<vlan-list>[tag|untag]
Thiscommandaddsahybrid
porttoaspeciedVLAN.
AddingPortstoaVLANinBatches
ToaddportstoaVLANinbatches,usethefollowingcommand.
CommandFunction
ZXR10(config-vlanX)#switchport{pvid|tag|untag}<por
t-list>
ThisaddsportstoaVLANin
batches.
SettingtheNativeVLANforaTrunk
orHybridPort
AnaccessportbelongstoonlyoneVLAN,itsnativeVLANisthe
VLANtowhichitbelongs.Thisrequiresnoadditionalconguration.
Trunkportandhybridportbelongtomultiplevlansandtheyneed
tosetnativevlan.Ifnativevlanissetonport,whenoneframe
withnovlantagisreceivedonport,itwillbeforwardedtotheport
belongingtothisnativevlan.Nativevlanoftrunkportandhybrid
portisvlan1bydefault.
St-
ep
CommandFunction
1
ZXR10(config-gei_1/x)#switchporttrunknativevlan
{<vlan-id>|<vlan-name>}
Thiscommandsetsnative
VLANforatrunkport.
2
ZXR10(config-gei_1/x)#switchporthybridnative
vlan{<vlan-id>|<vlan-name>}
Thiscommandsetsnative
VLANforahybridport.
SettingVLANFilteringonaPort
TosetVLANlteringonaport,usethefollowingcommand.
CommandFunction
ZXR10(config-gei_1/x)#ingressfiltering{enable|disab
le}
ThissetsVLANlteringona
port.
8CondentialandProprietaryInformationofZTECORPORATION