Zte ZXR10 5900E Series - Configuring ZESS Control VLAN; Configuring ZESS Port

ZXR105900ESeriesUserManual(EthernetSwitchingVolume)
ParamtersDescription
Parameter
Description
<1-4>
DomainID,itindicatesZESSdomain.
revertive|non_revertiveinversionornon-inversionmodes,Ininversionmode,when
mainlinkrecovers,servicewillbecutagain,whereasin
non-inversionmode,servicewillstillbetransmittedon
standbylink.
Example
CongureZESSnodethatdomainis1andinnon-inversionmode.
ZXR10(config)#zessdomain1modenon_revertive
ConfiguringZESSControlVLAN
ZESSnodecansendushpackettouppernodeforcleaningFDB.
St-
ep
CommandFunction
1
ZXR10(config)#zessdomain<1-4>ctl-vlan<1-4094>
ThisconguresZESSctl-vlan.
2
ZXR10(config)#nozessdomain<1-4>ctl-vlanThisdeletesZESScontrol
VLAN.
ParameterDescription:
Parameter
Description
<1-4>
DomainID,itindicatesZESSdomain.
<1-4094>
ControlvlanId,itisusedtosendushpacketwhichis
multicastinthisvlan.
Example
1.Conguredomain1controlvlanas2000.
ZXR10(config)#zessdomain1ctl-vlan2000
2.Deletesdomain1controlvlan.
ZXR10(config)#nozesrdomain1ctl-vlan
ConfiguringZESSPort
TocongurethedesignatedportasZESSpacketreceivingport,
usethefollowingcommand.Thiscommandmustbecarriedout
inthecorrespondingportmode.
70CondentialandProprietaryInformationofZTECORPORATION