12
Via USB Cable
1. Connect the device to your PC or Mac with a USB
cable.
2. Power on your device.
3. Your computer detects and recognizes new hardware
and nishes the installation automatically.
NOTE: If the system does not launch installation
automatically, you can run the installation program in
path of My Computer > O2MobileWi.
4. Wait a moment, and then the client will connect to
your device successfully.
Accessing the Internet
O2 Mobile Broadband Manager
Once you are connected to the device you can open a
browser and access the O2 Mobile Broadband Manager
at http://o2.mobilewi or http://192.168.3.1. The default
password is “admin”.
Please refer to the O2 leaet in the box to see how to use
your O2 Mobile Broadband.
To Next Page
Loading...
