3. A microSD memory card is an optional accessory so you can use the USB modem as a portable storage
device. The microSD is not included in the box. Open the SD cover on the side panel and insert as
shown below:
4. Slide the front cover gently back into place.
Connect the Modem to Your PC
1. Plug the USB connector into your computer’s USB port and make sure that it is tightly inserted.
2. The OS automatically detects and recognises your modem and starts the installation wizard.
Installing Software
For Windows OS
Follow the system prompts to complete the software installation.
NOTE:
If the system does not launch the installation automatically, you can run the installation program from
My Computer > ZTEMODEM.
To Next Page
Loading...
Need help?
General
