Zte MF730M Quick Start Guide

RF SAFETY INFORMATION
 The wireless device has an internal antenna. For optimum performance with minimum power
consumption do not shield the device or cover with any object.
 Covering the antenna affects signal quality and may cause the device to operate at a higher power
level than needed.
RADIO FREQUENCY ENERGY
 The wireless device is a low-power radio transmitter and receiver.
When switched on it intermittently transmits radio frequency (RF) energy (radio waves).
 The transmit power level is optimized for best performance and automatically reduces when there is
good quality reception.
 Maximum power is only used at the edge of network coverage so under most circumstances the
power output is very low.
 Under poor network conditions the device transmits at a higher power level and may get hot.
SPECIFIC ABSORPTION RATE (SAR)
 The wireless device is designed to be used in close proximity to the body. We declare that the product
detailed in this manual, and in combination with our accessories, conforms with the essential
requirements of the New Zealand Standard (NZS2772) when used at a distance of not less than 10mm
from the body.
 The worst case SAR result is published on http://zte.co.nz
Z1196

Zte MF730M Specifications

General

Brand	Zte
Model	MF730M
Category	Modem
Language	English