What to do if the operating system cannot install the Zte MF79S software automatically?
If the operating system cannot automatically install the software after you insert the Zte Modem into your computer’s USB port, install the software manually by running the installation program in the path of My Computer/ZTEMODEM. If the driver of your device is abnormal, reinstall the software. You need to uninstall the software first.
What to do if the client connected to Zte Modem cannot access the Internet?
If your client cannot access the Internet when connected to the Zte Modem, ensure that your (U)SIM card is available. Also, try changing the location to find a place with a good signal. In addition, check the settings of the WAN connection mode. If the issue persists, contact your service provider to confirm your APN settings.
Why the connection between my Zte MF79S and a client through Wi-Fi cannot be established?
If the Wi-Fi connection between your Zte Modem and a client cannot be established, first ensure that the Wi-Fi function is enabled. Then, refresh the network list and select the correct SSID. Check the IP address and make sure your client can automatically obtain an IP address. Finally, verify that you are entering the correct network key (Wi-Fi password) when connecting the client to your device.
Identifies physical components of the device.
Explains the meaning of different LED indicator statuses.
Describes how the device connects to the internet and supports multiple clients.
Guides users through opening the device and inserting the SIM card.
Details microSDHC card installation and final cover closure.
Instructions for connecting the device to a computer via USB and installing software.
Steps to connect a client device to the device using Wi-Fi.
Steps to access the device's web-based configuration interface.
Procedure to modify the Wi-Fi network name and password.
Explains how to connect to the internet in automatic or manual modes.
Guide to configure PC's Internet Protocol for Wi-Fi connection.
Important safety and operational warnings for device usage.
Details the terms and conditions of the product's warranty.
Outlines ZTE's responsibilities and limitations regarding product use.
Provides important FCC compliance information and warnings.
Contains copyright, usage rights, and publication details for the manual.
Solutions for problems encountered during automatic software installation via USB.
Steps to resolve issues with establishing a Wi-Fi connection.
Troubleshooting steps when the connected client cannot access the Internet.
Solutions for problems accessing the device's configuration page.
Provides contact information for support and additional resources.
To Next Page
General
