12
NOTE: If the system does not launch installation auto-
matically, you can run the installation program in path of
My Computer > ZTEMODEM.
4. Wait a moment, and then the client will connect to
your device successfully.
Accessing the Internet
3G Mode
After the client connected to your device successfully,
you can access the Internet in the Automatic or Manual
mode. The default mode is Automatic.
Mode Operations
Automatic
Your device will connect to the Internet
automatically, and your clients can surf on
the Internet directly.
Manual
Log in the webGUI configuration page,
and select Settings > Network Settings
> Network Selection > Manual (To
change current setting, please disconnect
from network), then Apply.
To Next Page
Loading...
