Zte MF970 - Page 18

18
 Mode: If a fixed APN is provided by your service provider,
select M anual APN. Otherwise, please select Auto APN, and
the device will automatically obtain parameters.
 Profile: It contains one or more profile names.
 PDP Type: IPv4/IPv6/IPv4&IPv6.
 Profile Name: It refers to the name that you assign to the
new profile.
 APN: Access Point Name. The APN contains 0-9 a-z A-Z . -
and it can't start with and end with .or -.
 Authentication: Is provided by your Internet Ser vice
Provider(ISP).Passwor d Authentication Protocol (PAP)
provides a simple method without encryption for the peer to
establish its identity using a 2-way handshake.
Challeng e-Handshake Authentication Pr otocol (CHAP) is
used to periodically verify the identity of the peer using a
3-way handshake.
 User Name: User name is used to obtain authentication from
the ISP when the connection is established.
 Password: Password is used to obtain authentication fr om
the ISP when the connection is established.
 Click "Set as default" to set this profile as the default profile.
NOTE:
Please disconnect the device from the network before changing
settings.