9
3. Wait until the computer is connected to your device
successfully.
Using the WPS(Optional)
If your client devi ce s upports WPS, you don’t have to input the
password manually after WPS is available. Please perform the
following steps:
1. Power on your device, and enable the Wi-Fi function on your
device.
2. Enable WPS function. Please press the FUNC Key.
3. Select W PS to start Wi-Fi Protected Setup authentication
process.
4. Enable the WPS function on your client to respond this
authentication process.
5. Follow the system prompts on your client to finish the
connection.
NOTES:
The device will wait to r eceive the access request of wireless
access client within 2 minutes.
For detailed operations about the client, please refer to the
client’s user manual.
To Next Page
Loading...
