Zte MIDNIGHT PRO LTE - Connecting to Networks and Devices; Set Access Point Names; Connecting to Wi-Fi; Adding and Connecting Wi-Fi Networks

2524
Set Access Point Names
To connect to the Internet you can use the default Access Point Names (APN). And if
you want to add a new APN, please contact the service provider to get the necessary
information.
1. Touch the Home Key > > Settings > Mobile networks.
2. Touch Access Point Names > > New APN.
3. Touch each item to enter the information you get from your service provider.
4. Touch > Save to complete.
NOTE: To set the APN to default settings, touch > Reset to default.
Connecting to Wi-Fi
Wi-Fi is a wireless networking technology that can provide Internet access at distances of
up to 100 meters, depending on the Wi-Fi router and your surroundings.
Turn Wi-Fi On and Connect to a Wi-Fi Network
1. Touch the Home Key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position to turn on Wi-Fi.
3. Touch a network name to connect to it.
4. If the network is secured, enter the password and touch CONNECT.
NOTE: Your phone automatically connects to previously used Wi-Fi networks when they
are in range.
Get Notied of Open Networks
1. Touch the Home Key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Touch > Advanced.
4. Slide the Network notication switch.
Connecting to Networks and DevicesConnecting to Networks and Devices
When Wi-Fi is on, you receive notications in the Status Bar when your phone detects an
open Wi-Fi network. Switch o the option to turn o notications.
Add a Wi-Fi Network
You can add a Wi-Fi network if the network does not broadcast its name (SSID) or add a
Wi-Fi network when you are out of range.
To connect to a secured network, you rst need to get the security details from the
network’s administrator.
1. Touch the Home Key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Touch > Add network.
4. Enter the network SSID (name). If necessary, enter security or other network
conguration details.
5. Touch SAVE.
Connect to a WPS Network
WPS (Wi-Fi Protected Setup) is a feature that makes it easy to add your phone to access
points which support WPS.
You can use one of the following two methods to connect your phone to a wireless
network using WPS.
Method one: WPS button
1. Touch the Home Key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Touch > Advanced > WPS Push Button.
4. Touch the WPS button on the access point and the access point will recognize your
phone and add it to the network.