26 27
Method two: PIN
1. Touch the Home Key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Touch
> Advanced > WPS Pin Entry.
4. The WPS PIN displays on the screen. Enter the PIN into the access point’s setup page.
After entering the PIN, your phone automatically
nds the access point and congures
the connection.
NOTE: For detailed information about the WPS feature of the access point, please refer to
its user documents.
Forget a Wi-Fi Network
You can make your phone forget the details of a Wi-Fi network that you added—for
example, if you don’t want the phone to connect to it automatically or if it is a network
that you no longer use.
1. Touch the Home Key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Touch the Wi-Fi network name and then touch FORGET.
Adjust Advanced Wi-Fi Settings
1. Touch the Home Key > > Settings > Wi-Fi.
2. Touch
> Advanced to adjust the following settings:
• Scanning always available: Let Google’s location service and other apps scan for
networks even when Wi-Fi is o.
• Keep Wi-Fi on during sleep: Set whether or not to keep Wi-Fi on in sleep mode.
• Install certicates: Install certicates needed for connecting to certain Wi-Fi
networks.
• Wi-Fi Direct: Use the Wi-Fi Direct feature.
• WPS Push Button: Connect to a WPS network via the push button method.
Connecting to Networks and DevicesConnecting to Networks and Devices
• WPS Pin Entry: Connect to a WPS network via the phone PIN method.
• MAC address: Check the MAC address.
• IP address: Check the phone’s IP address.
Using Wi-Fi Direct
Wi-Fi Direct allows Wi-Fi devices to share les and data directly by connecting to each
other without the need for wireless access points (hotspots).
NOTE: Activating this feature will disconnect your current Wi-Fi network connection.
1. Touch the Home Key > > Settings > Wi-Fi.
2. Touch
> Advanced > Wi-Fi Direct. Your phone will search for other devices enabled
with Wi-Fi Direct connections.
3. Touch a device name below Peer devices to connect with it. The other device will
receive a connection prompt and need to accept the request.
4. Once connected the device is displayed as “Connected” in the Wi-Fi Direct screen.
Connecting to Bluetooth Devices
Bluetooth is a short-range wireless communication technology. Phones or other
devices with Bluetooth capabilities can exchange information wirelessly within a
distance of about 32.8 feet (10 meters). The Bluetooth devices must be paired before
the communication is performed.
Turn Bluetooth On/O
1. Touch the Home Key > > Settings > Bluetooth.
2. Slide the Bluetooth switch to the On or O position.
When Bluetooth is on, the
icon will appear in the Status Bar.
Change the Device Name
1. Touch the Home Key > > Settings > Bluetooth.
2. Slide the Bluetooth switch to the On position if Bluetooth is o.
To Next Page
