Zte MIDNIGHT PRO LTE - Phone Calls; Call Restrictions and Modes; Screen and Sensor Settings; Other Call Options

38
Phone Calls
39
2. Touch an available option (Always forward, Forward when busy, Forward when
unanswered, or Forward when unreachable) to enable it.
Bar Certain Calls
Call barring feature allows you to forbid certain types of calls from your phone.
1. Touch the Home Key > > (in the top search eld) > Settings > Call settings >
Call barring.
2. Set the restriction of specic types of calls from your phone.
Set TTY Mode
Select a TTY mode for your phone to work with a teletypewriter, or turn TTY o.
1. Touch the Home Key > > (in the top search eld) > Settings > Call settings >
TTY mode.
2. Select one of the following options. Consult your teletypewriter manufacturer’s
manual if necessary.
• TTY O: Users who can hear and talk can disable TTY support.
• TTY Full: Users who cannot talk or hear may use this mode to send and receive text
messages through TTY device.
• TTY HCO: Users who can hear, but cannot talk, may use this mode to listen to
conversation of the other party, and respond via text messages.
• TTY VCO: Users who can talk, but cannot hear, may use this mode to talk through
the phone and receive responses via text messages.
Set DTMF Tones
You can set the length of Dual-tone multifrequency (DTMF) signal tones.
1. Touch the Home Key > > (in the top search eld) > Settings > Call settings >
DTMF tones.
2. Touch Normal or Long.
Phone Calls
Set Display Duration
You can enable or disable the display duration.
1. Touch the Home Key > > (in the top search eld) > Settings > Call settings.
2. Check Display duration to enable or disable the display duration.
Set Proximity Sensor
With proximity sensor turned on, the screen will be turned o to save power when you
answer a call.
1. Touch the Home Key > > (in the top search eld) > Settings > Call settings.
2. Check Turn on Proximity Sensor.
Set Vibrating after Connected
With vibrating after connected enabled, your phone will vibrate when answers.
1. Touch the Home Key > > (in the top search eld) > Settings > Call settings.
2. Check Vibrating after connected.
Other Options
1. Touch the Home Key > > (in the top search eld) > Settings > Call settings >
Additional settings.
2. Touch Caller ID to choose whether your number is displayed when someone receives
your outgoing call. Or check Call waiting to get notied of incoming calls during a call.
NOTE: Please contact the service provider to check whether the caller ID and call waiting
features are available.