9GETTING STARTED
8 GETTING STARTED
Inserting a microSDHC
™
card
1. Open the microSDHC card slot and insert
a microSDHC card (not included) with the
gold-colored contacts facing the front of
the phone.
2. Close the microSDHC card slot.
Removing the battery and
SIM/microSDHC card
1. Power off your phone.
2. Remove the back cover.
3. Lift the battery up and out.
4. Slide the SIM card out.
5. Open the microSDHC card slot and push in on the card until you hear
a click. Once you release the card it should pop out of the phone.
Charging the battery
Note: For best performance, charge the battery
fully prior to using the phone for the rst time.
1. Insert the charger’s connector into the
charging port. Be sure to insert the
connector in the correct orientation.
Do not force the connector into the port.
2. Plug the charger into a standard
AC wall outlet.
3. When the battery is fully charged, unplug the
charger and disconnect it from the phone.
Switching your phone on/off
Make sure the SIM card is in your phone and the battery is charged.
• Press and hold the Power key to turn on your phone.
• To turn it off, press and hold the Power key to open the options menu.
Tap Power off > OK.
Setting up your phone for the rst time
When you rst power on your phone after you purchase it or reset it to factory
settings (see Phone settings – Factory reset), you need to set up your phone
settings before using it.
1. Scroll the language list to highlight the language you need and then
tap Start.
2. If you have a Gmail account, tap Yes to sign in to Google. Tap No if you do
not have an account.
3. To create a Google account, tap Get an account. You can also tap
Not now to set up an account later.
4. Congure the Google location options and tap .
5. Input your name and tap .
6. Read the Google services information and tap .
7. Tap Finish to complete setup.
Switching to Sleep Mode
To save battery power, Sleep Mode suspends your phone in a low-power-
consumption state while the display is off. Your phone also goes into Sleep
Mode by itself when the display is automatically turned off after a certain
To Next Page
Loading...
