Zte Spro 2 - Connecting to Wi-Fi

26
27
Tap each item to enter the information you get from your service provider.
Tap > Save to complete.
NOTE: To set the APN to default settings, tap > Reset to default > Continue.
Connecting to Wi-Fi
Wi-Fi is a wireless networking technology that can provide wireless Internet access
over distances of up to 300 feet (90 meters).
Connecting to a Wi-Fi Network
Tap > SETTINGS > Network > Wi-Fi.
Slide the Wi-Fi switch to the ON position to turn on Wi-Fi.
Tap a network name to connect to it.
If the network is secured, enter the password and tap Connect.
NOTES:
• YourZTESpro2automaticallyconnectstopreviouslyusedWi-Finetworkswhen
they are in range.
• ToconnecttoaWi-FirouterthatsupportsWPS,tap on your ZTE Spro 2’s
Wi-Fi menu and press the WPS button on your router.
Getting Notified of Open Networks
When Wi-Fi is on, your ZTE Spro 2 can notify you of detected open Wi-Fi networks by
showing in the status bar. Here’s how to turn this feature on or off.
Tap > SETTINGS > Network > Wi-Fi.
Slide the Wi-Fi switch to the ON position.
Tap > Advanced.
Check or uncheck Network notification.
Adding a Wi-Fi Network
You can add a Wi-Fi network if the network does not broadcast its name (SSID), or
to add a Wi-Fi network when you are out of range.
To connect to a secured network, you first need to get the security details from the
network’s administrator.
Tap > SETTINGS > Network > Wi-Fi.
Slide the Wi-Fi switch to the ON position.
Tap ADD NETWORK.
Enter the network SSID (name). If necessary, enter security or other network
configuration details.
Tap Save.
Deleting a Wi-Fi Network
You can delete a Wi-Fi network that your ZTE Spro 2 is connected to – for example,
if you don’t want your ZTE Spro 2 to connect to it automatically or if it is a network
that you no longer use.
Tap > SETTINGS > Network > Wi-Fi.
Slide the Wi-Fi switch to the ON position.
Tap the Wi-Fi network name and then tap Forget.
Connecting to a WPS Network
Wi-Fi Protected Setup (WPS) makes it easy to connect your ZTE Spro 2 to access
points that support WPS.
You can use one of the following methods to connect to a wireless network
using WPS.