20
Waking Up Your Spro2
Your Spro2 automatically goes into sleep mode when it is not in use
for certain time. The touch screen is turned off to save power and the
keys are locked to prevent accidental operations.
You can wake up your Spro2 by following the instructions below.
1. Press the Power Key to turn the touch screen on.
2. Touch and hold any area of the screen to unlock Spro2.
NOTE:
If you have set an unlock pattern, a PIN or a password for your Spro2,
you’ll need to draw the pattern, or enter the PIN/password to unlock
your Spro2.
To Next Page
Loading...
