54
operate at multiple power levels so as to use only the power required
to reach the network. In general, the closer you are to a wireless base
station antenna, the lower the power output.
The exposure standard for wireless employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit set by
the FCC is 1.6 W/kg.
Tests for SAR are conducted using standard operating positions
accepted by the FCC with the device transmitting at its highest
certified power level in all tested frequency bands.
The FCC has granted an Equipment Authorization for this model
device with all reported SAR levels evaluated as in compliance with
the FCC RF exposure guidelines. SAR information on this model
device is on file with the FCC and can be found under the Display
Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID:
SRQ-ZTEMF97V.
For this device, the highest reported SAR value for near the body is
0.79 W/kg. The highest reported SAR value for simultaneous
transmission is 0.93 W/kg.
While there may be differences between the SAR levels of various
devices and at various positions, they all meet the government
requirement. SAR compliance for body operation is based on a
To Next Page
Loading...
Need help?
General
