40
1. Slide the status bar down to open the notification panel and to
ensure Connect to USB stick is highlighted.
2. Connect the USB device to Spro2 using the USB jack.
3. Touch Home > APPS > File Manager.
4. Touch USB DEVICE to open the file to project.
5. Turn on the projector. For more information, see Turning the
Projector On and Off.
NOTES: To disconnect the USB device from the Spro2, open the
notification panel and touch > OK.
The Spro2 supports a maximum capacity portable hard drive
size of 2 TB and a maximum capacity of 64 GB for the USB
flash drive.
Press the Power button twice quickly to adjust projection
focus automatically.
To Next Page
Loading...
