41
Projecting a Source on the Phone
Using Miracast - Wi-Fi Display
Follow these steps to display the content from a compatible
smartphone on the Spro2 with a Miracast Wi-Fi Display link.
1. Turn on the projector. For more information, see Turning the
Projector On and Off.
2. Swipe down the status bar at the top of the screen and touch
Miracast to highlight it.
3. Open a Wi-Fi display application on the phone to scan for
available devices within range.
4. When you see the name of the Spro2 in the available devices
section, touch the name. The phone automatically tries to pair
with the Spro2.
To Next Page
Loading...
