Zte Spro2 - Wi-Fi Direct Device Linking

51
sleep mode
 Scanning always available: Allow Google‟s location
service and other apps to scan for networks, even when
Wi-Fi is off
 Wi-Fi band: Select the Wi-Fi frequency band according to
the available Wi-Fi networks.
 Install certificates: Install certificates from the internal
storage or the external microSDHC card. Some Wi-Fi
networks need to find the correct certificates to grant
access.
 Wi-Fi optimization: Minimize battery use when Wi-Fi is
on.
 MAC address: Check the MAC address.
 IP address: Check the IP address.
Using Wi-Fi Direct
®
Wi-Fi Direct allows Wi-Fi devices to connect to each other
without wireless access points (hotspots).
NOTE: Wi-Fi Direct is not completely compatible among
different device manufacturers and may require installing
third-party applications to share files between different
devices from different manufacturers.
Connect to another Device Using Wi-Fi Direct
1. Touch Home > SETTINGS > System > Network > Wi-Fi.
2. If Wi-Fi is off, slide the Wi-Fi switch to the ON position.