Zte Spro2 - Page 50

50
4. The WPS PIN displays on the screen. Type the PIN into the
access point's setup page.
After entering the PIN, the Spro2 automatically finds the access
point and configures the connection.
Method three: Using the Access Point PIN
1. Touch Home > SETTINGS > System > Network > Wi-Fi.
2. Slide the Wi-Fi switch to the ON position.
A WPS capable access point has the icon next to the
name.
3. Touch a WPS-capable access point.
4. In the window that opens, check Show advanced options.
5. Touch the field below WPS PIN from access point and
select Enable.
6. Enter the access point PIN and touch Connect. The PIN is
on the access point‟s configuration page.
NOTE: For more information about the access point‟s WPS
feature, refer to the user documents.
Adjusting Advanced Wi-Fi Settings
1. Touch Home > SETTINGS > System > Network > Wi-Fi.
2. Touch the Menu > Advanced to adjust these settings:
 Network notification: Display notifications in the status
bar when Wi-Fi is on and an open network is available
 Keep Wi-Fi on during sleep: Set to keep Wi-Fi on in