Zte Spro2 - Page 49

49
example, if you don‟t want the Spro2 to connect to it
automatically or if it is a network that you no longer use, follow
these steps:
1. Touch Home > SETTINGS > System > Network > Wi-Fi.
2. Slide the Wi-Fi switch to the ON position.
3. Touch the Wi-Fi network name and then touch Forget.
Connect to a WPS Network
Wi-Fi Protected Setup (WPS) simplifies adding the Spro2 to
access points that support WPS. Use one of these methods to
connect the Spro2 to a wireless network using WPS:
Method one: WPS button
This is the recommended method
1. Touch Home > SETTINGS > System > Network > Wi-Fi.
2. Slide the Wi-Fi switch to the ON position.
3. Touch .
4. When you press the WPS button on the wireless router, the
access point recognizes the Spro2 and adds it to the
network.
Method two: Spro2 PIN
1. Touch the Home > SETTINGS > System > Network >
Wi-Fi.
2. Slide the Wi-Fi switch to the ON position.
3. Touch Menu > WPS Pin Entry.