Zte Spro2 - Page 52

52
3. Touch the Menu > Wi-Fi Direct. The Spro2 searches for
other devices enabled with Wi-Fi Direct connections.
4. Touch a device name under PEER DEVICES to connect with
it.
The other device will receive a connection prompt and must
accept the request for connection. Both devices may need to
enter a common PIN.
After connecting, the device is displays as Connected in the
PEER DEVICES list.
Send Data Using Wi-Fi Direct
1. Open the appropriate application and select the file or item to
share.
2. Select the option for sharing using Wi-Fi Direct. The method
may vary by application and data type.
3. Touch a device the Spro2 connected with or wait for it to
search for new devices and touch one of them.
Receive Data Using Wi-Fi Direct
When the Spro2 receives an attempt to transfer data using Wi-Fi
Direct, the notification displays in the status bar. Open the
notification panel, touch the notification and select Accept to
start receiving the data.
Received files are stored automatically in a dedicated folder, for
example WiFiShare. Use File Manager to access the files.