45
4. When the connection completes, the Spro2 content displays
on the mobile device and you can use the mobile device as a
remote control.
Touch the mobile device screen to control the Spro2.
Use , and on the remote control app
screen as the Back button, the Home button and the
Menu button of Spro2.
Touch to turn on the Spro2 projector or open the
projector settings pop-up menu. Double-tap to adjust
projection focus automatically.
Method three: Wi-Fi Direct
NOTE: This method is only available for Android devices
that support Wi-Fi Direct.
1. Touch Home > SETTINGS > Projector > Control and slide
the Remote Control switch to the ON position.
2. Connect the Android device to the Spro2 using Wi-Fi Direct.
For more information, see Connect to Another Device Using
Wi-Fi Direct.
3. Open the remote control app on the Android device and the
app starts to connect to the Spro2.
NOTE: The first time you use the Spro2 or after
restarting it, touch OK to accept the connection.
To Next Page
Loading...
