62
2. Slide the switch to turn on the virtual hotspot, the LAN access
point.
3. On another device, locate the Spro2 using Wi-Fi and connect
with it.
Or, if the device supports Wi-Fi Protected Setup, touch the
WPS icon on the device, and touch on the Spro2.
Set Your Virtual Hotspot
To change the name of the Spro2 virtual hotspot, the SSID,
secure it with a password, and set other options, follow these
steps:
1. Touch Home > SETTINGS > System > Network > Virtual
Hotspot.
2. Touch CONFIGURE to set these options:
Network Name: Enter or edit a network name that other
devices see when scanning for Wi-Fi networks.
Wi-Fi band: Set the band the virtual hotspot should be
available on.
Channel: To avoid interference with other Wi-Fi networks,
try using a different channel.
Security: Choose a security option:
None - not recommended
WPA2 PSK - other users can access the virtual
hotspot only if they enter the correct password.
When you select WPA2 PSK, touch the Password
field to edit the security password.
To Next Page
Loading...
