Zte Spro2 - Addressing Software and Performance Glitches

99
Problem
Possible causes
Possible solution
Poor Wi-Fi
signal
The Wi-Fi network
signal is too weak at the
current location.
Move closer to the Wi-Fi
hotspot or a location
without an obstacle
between the Spro2 and
the hotspot.
The Spro2
crashes,
reboots,
freezes, or
cannot
power on
Some third-party
software is not
compatible with the
Spro2.
Uninstall software that
may be causing the
problem.
Upgrade the Spro2‟s
software.
Reset the Spro2 to
factory status.