Zte USB Modem - Selection

19
User name.
The Advanced setting information includes: DNS, PDP
server, Authentication Mode, PDP Type. If network
supports “Obtain server address automatically”, the
modem can obtain the assigned IP information
automatically. If network does not support it, you should
input the proper address manually. Please consult the
network supplier of (U) SIM-card for all above
information. The configuration information may be
various according to the different network suppliers and
network types.
The information on NDIS includes:
Config File, APN, etc.
3.5.2 Selection
Network Selection
Note: On 4G the Network Selection cannot be used
properly.
Automatic: The system selects the network automatically
by the user’s selected rules and the network status.
Manual: The network is selected by users themselves.
When the “Manual” is selected, click the “Search” button
to research the network. Wait a minute, the supplier list
will show in the windows and which with the available
status can be selected. Select a proper network to connect.
Select the network that the supplier is utilized to serve
your USIM/SIM and press “Apply” to enter the network.