Zte USB Modem - FAQ: Connectivity and Signal Issues; No Signal Indication After Restart

24
Problem
Description
Possible Causes Problem Solving
After the
device is
plugged in, the
UI program
doesn't run
automatically.
The system
configuration is
incorrect.
Please open the
UI program
manually. You
can find it on the
desktop.
After restarting
the computer,
there is no
signal
indicated.
1. You are in the
place where there
is no GSM/ GPRS
/EDGE /WCDMA
/HSDPA (HSUPA)
/LTEnetwork
coverage. Such
places include
underground
parking garages,
tunnels, and some
remote rural areas.
1. Change
location to find a
good where
having signal.
2. The device is not
properly connected.
2. Close the
device safely as
usual, pull out
the device and
reinsert the
device again.