Zte Z610DL - Page 53

53
phone to connect to it automatically or if it is a network that
you no longer use.
1. Tap the Home Key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Tap the Wi-Fi network name and then tap FORGET.
NOTE: If the Wi-Fi network you want to forget is not in the current
list, tap > Saved networks for more.
Connecting to a WPS Network
Wi-Fi Protected Setup (WPS) is a feature that makes it easy
to add your phone to the access points which support WPS.
You can use one of the following methods to connect your
phone to a wireless network using WPS.
Method one: WPS button (Recommended)
1. Tap the Home Key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Tap > Advanced > WPS Push Button.
4. Press the WPS button on the access point, and it will
recognize your phone and add it to the network.
Method two: PIN
1. Tap the Home Key > > Settings > Wi-Fi.
2. Slide the Wi-Fi switch to the On position.
3. Tap > Advanced > WPS Pin Entry.