54
4. The WPS PIN displays on the screen. Enter the PIN into the
access point's setup page.
After entering the PIN, your phone automatically finds the access
point and configures the connection.
NOTE: For detailed information about the WPS feature of the
access point, please refer to its documentation.
Adjusting Advanced Wi-Fi Settings
1. Tap the Home Key > > Settings > Wi-Fi.
2. Tap to adjust the following settings.
Network notification: Get notifications in the Status Bar
when Wi-Fi is on and an open network is available.
Keep Wi-Fi on during sleep: Choose whether to keep
Wi-Fi on in sleep mode.
MAC address: Check the MAC address.
IP address: Check the phone’s IP address.
- or -
Tap > Advanced to adjust the following settings.
Install certificates: Install certificates needed for
connecting to certain Wi-Fi networks.
WPS Push Button: Connect to a WPS network via the
push button method.
WPS Pin Entry: Connect to a WPS network via the
phone PIN method.
To Next Page
Loading...
