EasyManua.ls Logo

Zte Z723EL - Checking Voicemail; Set Up a Conference Call

Zte Z723EL
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1716
SPECIFICATIONS TROUBLESHOOTING
PROBLEM SUGGESTED SOLUTION
There is no dial tone.
After turning the Z723EL on, wait 1 to 2
minutes before making a call.
Move the device to a location with better
signal reception.
The connection sounds
distorted/noisy.
Remove any electrical appliances that are too
close to the phone or router.
The cable or phone set might be damaged.
Try using a dierent cable or phone, or
contact the dealer.
There is a busy tone when
the phone is removed from
the receiver.
Place the phone back on the receiver and
try again.
After dialing, there is
no tone.
After dialing, wait 4 to 8 seconds for the call
to connect.
For more assistance, please visit www.zteusa.com.
DEVICE
Model Z723EL
Dimension 1.11 x 6.30 x 5.51 in.
Weight Approximately 13.5 oz. (383.5 g)
Frequency 1.1G
Supported Technology LTE
BATTERY
Limited Charge Voltage 4.35 V
Type Lithium-ion
Capacity 2300 mAh
Talk Time Approximately 3 hours
Standby Time Approximately 13 hours

Other manuals for Zte Z723EL

Related product manuals