4 5
GETTING STARTED
Install Your Battery
1. With the back cover facing upright, sandwich the device between your
hands. Slide your top hand down to remove the back cover.
2. Insert the battery by aligning the metal contacts on the battery with the
metal contacts in the battery compartment. Gently push down on the
battery until it clicks into place.
3. Replace the back cover.
Charge Your Battery
1. Connect the adapter to the power socket on the Z723EL. Do not force the
connector into the power socket.
2. Connect the charger to a standard AC power outlet.
3. Disconnect the charger when the battery is fully charged.
To Next Page
Loading...
