Zte Z723EL - Connect the Z723 EL to a phone; Placing and Ending Calls

12 13
USING YOUR Z723EL
Notes:
If your phone does not have a Flash (or Talk) key, use the o-hook mechanism
supported by your phone instead.
The call waiting and three-way call features need network support and
may result in additional charges. Please contact your service provider for
more information.
Forward Incoming Calls
The call forwarding feature allows you to forward your incoming calls to
another phone number, such as your mobile phone or oce number. If you’ve
enabled call forwarding, your home phone will not receive calls until you turn
this service o.
Note: Airtime applies to forwarded calls even if you send the call to
landline phones. Contact your service provider for assistance on how to set
an available option (Always forward, When busy, When unanswered,
or When unreachable).
Set Up a Conference Call
When the call waiting and three-way call features are available, you can switch
between two calls or set up a conference call. With this feature, you can talk to
two people at the same time.
1. Place the rst call.
2. Once you have established the connection, press the Flash (or Talk) key on
your phone.
3. When you hear a dial tone, dial the second number.
4. When you’re connected to the second party, press the 3 key and the Flash
(or Talk) key to complete the three-way connection.
5. To end the conference call, hang up your home phone or return the phone
receiver to its base.
If one of the people you called hangs up during your call, you and the
remaining caller stay connected. If you initiated the call and are the rst to
hang up, all callers are disconnected.
Use Call Waiting
Call waiting allows you to be notied of incoming calls while on a call.
To place the current call on hold and accept the incoming call, press the Flash
(or Talk) key. You can then press the Flash (or Talk) key anytime to switch back
and forth between calls.