24
Basic
Switching On/Off
Notes:
Do not power on your phone if wireless phone use is unapproved, or
when it may cause interference or danger.
1. Press and hold the End Key to turn on the phone.
Tips:
● When being asked, enter your PIN (Personal Identification Number)
code or handset code and press the OK Key to confirm.
● The PIN code is the password provided by your network service
provider. You need this password to use the UIM card.
● When the entered PIN code or handset code is accepted, the phone
will automatically search for the designated network. After a few
seconds, your phone will show the standby mode.
2. To power off the phone, press and hold the End Key from the standby
mode.
Indicators and Icons
Signal strength
Roam
New short message
Message box full
Vibrate
Vibrate + ring tone
Alarm
Silent
Calling
Earphone
Battery capacity
T-flash card
To Next Page
Loading...
