Zte ZXA10 F660 - Configuring DHCP Binding

Chapter4NetworkConguration
4.3.2ConfiguringDHCPBinding
ShortDescription
PerformthisproceduretoconguretheDHCPbinding.
Prerequisites
TheuserhasloggedintotheWebinterfaceofthedevice.
Context
ToconguretheDHCPbinding,performthefollowingsteps:
Steps
1.OntheNetworktab,selectAddressManagement,andthenselectDHCPBinding,
asshowninFigure4-13.
Figure4-13DHCPBinding
2.CongurebindingbetweentheMACaddressandIPaddress.CreateaDHCPbinding
tabletomaptheclientMACaddresstotheIPaddress.
TheDHCPserverallocatesIPaddressesaccordingtothebindingrelations,andthe
bindingrelationsdonotexpire.
Forexample,iftheMACaddressissetto00-0a-e2-c6-48-baandtheIPaddress
issetto192.168.1.113,itindicatesthattheDHCPserverallocatestheIPaddress
192.168.1.113tothehostwhichtheMACaddresscorrespondsto.
Note:
TheIPaddressbelongstotheaddresspoolthatisprovidedbytheDHCPserverin
theLANgroup.
4-15
SJ-20110718111034-001|2011-07-18(R1.0)ZTEProprietaryandCondential