ZXDSL 831AⅡ User’s Manual
14
For Windows XP
The steps are as follows:
1 Connect USB port of the ZXDSL 831AⅡ to USB port on your PC with
the USB cable that comes with the ZXDSL 831AⅡ.
2 plug in the power cord, and turn on the power.
3 Once the new hardware is detected as shown in the dialog box below,
Choose "No, not this time". As shown in Figure 4.1-1, Click "Next" button.
Figure 4.1-1
4 The dialog box is as shown in Figure 4.1-2, Choose "Install from a list or
specific location(Advance)", and Click "Next" button.
To Next Page
Loading...
