ZXDSL 831AⅡ User’s Manual
17
Figure 4.1-5
8 A message box will show the installation of "ZTE USB Remote NDIS
Device" is complete. Click "Finish" button. As shown in Figure 4.1-6.
Figure 4.1-6
9 After the steps above, you will find there is a new item called "ZTE USB
Remote NDIS Device" in "Control Panel"-"System"-"Hardware"-"Device
Manager"-"Network adapters". As shown in Figure 4.1-7. And a new "Local
To Next Page
Loading...
