Zte ZXHN H560N - LED Indicator Status; Red LED; Green LED; Extender Mode Setup

- 2 -
After connecting the H560N, please check the indicators. The description is in Part 3.
3 LED indicator
ZXHN H560N uses a 2-color LED, red and green, to indicate the status as follow.
Color
Description
RED
ON: The device is booting or hardware error.
Flashing: In Extender mode, H560N is not connected to any other
wireless router.
GREEN
ON: Device runs normally, no wireless data transmitted.
Random Flashing: Data is being transmitted.
5Hz Flashing: In WPS mode.
4 Connect as Extender mode
1. Switch AP/Extender slid to Extender.