Zte ZXHN H560N - Computer IP Configuration; Login to H560 N; Wizard Configuration; Restore Computer IP

- 4 -
2. Assign a fixed IP address, 192.168.1.x for your computer.(The default mode is bridge
mode, H560N can’t assign IP address automatically)
3. Open a browser and Input 192.168.1.253 to login to H560N.
4. Use the Wizard to configure H560N.
5. Change your computer back to DHCP.
6 Safety Precautions
 Keep away from heat and keep good ventilation.
 Power off your H560N and remove all cable connections on thundery or rainy days.
 Keep your H560N dry during the storage, transportation, and operation.