What to do if my Zte ZXV10 B760H remote control fails?
If your Zte Set-top box remote control isn't working, the issue might stem from the batteries. First, make sure the batteries are correctly installed. If they are, try replacing them with fresh ones. If the remote still fails, try moving closer to the STB and ensure there are no obstructions between the remote and the STB.
Why is there no image on my Zte ZXV10 B760H TV screen?
If there's no image on your TV screen when using your Zte Set-top box, it could be due to a few reasons. First, check if the STB is in standby mode and turn it on using the remote. If that doesn't work, ensure the video cable is properly connected. Lastly, verify that the video input source on your TV is correctly selected; cycle through the input options until the EPG page appears.
Why is there no sound from my Zte Set-top boxes speaker?
If you're not getting any sound from the speaker when using your Zte Set-top box, there are a few things to check. First, make sure the STB isn't in standby mode; if it is, turn it on with the remote. Next, verify that the audio cable is securely connected. Also, check that neither the STB nor the TV is muted, and that the volume is turned up sufficiently on both devices.
How to fix a Zte ZXV10 B760H when the indicator is not lit?
If the indicator light isn't turning on after you switch on your Zte Set-top box, it could be due to a few reasons. Ensure that the power adapter is properly connected. If it is, the power adapter might be damaged, so consult your service provider for a replacement. Also, check that the power outlet itself has power.
What to do if user cannot connect to Zte ZXV10 B760H Set-top boxes EPG homepage?
If you can't connect to the EPG homepage on your Zte Set-top box, it might be due to a problem with your network connection. Ensure that the network cable is properly connected, and if it is, try replacing it with a new one. It's also possible that the service network is experiencing an outage, in which case you should wait for the service to be restored or contact your service provider. Finally, double-check that your network configuration is correct and reconfigure the network parameters if necessary.
How to fix Zte ZXV10 B760H when the sound does not match the image?
Some video programs are broadcasted in multiple audio tracks. To resolve the issue where the sound doesn't match the image on your Zte Set-top box, press the key on the remote control to switch the audio mode.
What to do for other problems with Zte ZXV10 B760H Set-top boxes?
To address other problems with your Zte Set-top box, restart the STB or call the customer service hotline.
General| Model | ZXV10 B760H |
|---|---|
| Category | Set-top box |
| Processor | Unknown |
| RAM | Unknown |
| Storage | Unknown |
| Operating System | Android |
| Connectivity | Ethernet, Wi-Fi |
| Video Output | HDMI |
| Audio Output | HDMI |
| Audio Decoding | MP3, AAC |
| Ethernet | 10/100 Mbps |
| Wi-Fi | 802.11 b/g/n |
| USB | USB 2.0 |
| Video Decoding | H.264, MPEG-2, MPEG-4 |
| Resolution | 1080p |
General advice for initial setup and ventilation.
Crucial safety guidelines for device operation and electrical safety.
Instructions for contacting service for device issues.
Overview of the items included in the product package.
Important notes regarding the packing list contents and handling.
Detailed description of the front panel indicators and controls.
Explanation of the rear panel ports and connectors.
Overview of the side panel ports, including USB and TF card slots.
Methods for connecting the STB to a network.
Methods for connecting video and audio outputs to a TV.
Steps for connecting SD video and audio using AV cables.
Instructions for connecting via HDMI for HD output.
Guide to connecting digital audio using the S/PDIF interface.
Steps to power on the device after connections are made.
Information on automatic firmware upgrades.
Detailed explanation of the STB remote control buttons and functions.
Process for customizing the remote control functions for TV/STB.
How to switch the STB between standby and working modes.
Navigating and using the Electronic Program Guide (EPG).
Using the remote for volume and audio mode control during playback.
Controls for pausing, playing, fast-forwarding, and rewinding programs.
Guide to watching time-shifted TV (TSTV) programs.
To Next Page
