11
Note:
If the STB remote control fails to control TV after learning, please learn
again following the above steps.
—END OF STEPS—
Chapter 6 Operation Guide
6.1 Standby/Working Status
Press key once to switch STB between the standby and working state.
Press key once to switch TV between the standby and working state.
Use TV/AV key to switch the system mode of TV.
6.2 EPG Operations
Press Menu key on the remote control to enter the EPG homepage.
Press direction keys (up, down, left, and right) on the remote control to select
an EPG item (such as button, text box, column).
Press OK key to confirm the selection.
When EPG contents are organized in multiple levels or pages, perform a page flipping operation
via the following keys.
Go to the upper level if the current level is not the top-most level.
To Next Page
Loading...
