Zte ZXV10 H100 - Page 13

Chapter 1 Introduction of the Product
1-3
The indicators on the front panel of the ZXV10 H100 are shown below:
The meanings of the indicators on the front panel of the ZXV10 H100 are show in the
table below:
Indicators Status Description
On Power-on self-test failure
Fault indicator.
Flashing
To be determined
The green indicator is
solid on
The device is powered on and the version
is being loaded/upgraded
Off The device is powered off
Run indicator
Flashing The device runs normally
The green indicator is
solid on
The ADSL synchronization is normal and
so is the link connection
Off The link is not set up yet
ADSL LINK indicator
Flashing The link is being set up through
hand-shake negotiation
The green indicator is
solid on
Working (switched on with the WLAN
button)
Off Stops working (switched off with the
WLAN button)
WLAN indicator
Flashing Flashing according to the network traffic
The green indicator is
solid on
Working (switched on with the Bluetooth
button)
Off Stops working (switched off with the
Bluetooth button)
Bluetooth indicator
Flashing Flashing according to the network traffic
The meanings of the indicators on the rear panel of the ZXV10 H100 are show in the
table below:
The meanings of the indicators on the rear panel of the ZXV10 H100 are show in the