Need help?Do you have a question about the Zte ZXV10 H100 and is the answer not in the manual?
General| Power Supply | 12V DC, 1A |
|---|---|
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Wireless | 802.11b/g/n |
| USB | 1 x USB 2.0 |
| Supported Protocols | DHCP, NAT, PPPoE |
Overview of the ZXV10 H100 home gateway and its functions.
Guidance on how to read and understand the manual for product installation and configuration.
Explains symbols, keyboard operations, mouse operations, and warning marks used in the manual.
Introduces the ZXV10 H100 home gateway as a modular access gateway for home networks.
Lists all components included in the H100 product package for user verification.
Details the interface and technical features of the ZXV10 H100 home gateway.
Describes the physical appearance and layout of the ZXV10 H100 device.
Outlines the necessary hardware and software prerequisites for using the H100.
Illustrates the typical network setup and application environment for the ZXV10 H100 home gateway.
Provides instructions for connecting the H100 to a local network via Ethernet or WLAN.
Guides users on connecting the H100 to the internet using an ADSL connection.
Details the procedure for connecting a telephone set to the H100 device.
Explains how to connect the power transformer to the H100 for proper operation.
Guides users through the process of installing the TCP/IP protocol on a client computer.
Explains how to configure TCP/IP settings on the client PC for network access.
Details methods to verify successful network connection and configuration using indicators and PING.
Describes how to access and log into the H100's web-based management interface.
Introduces the primary configuration options available through the H100's web interface.
Covers configuration of the H100's LAN interface IP address and subnet mask.
Guides on setting up various ADSL WAN connection types like Bridge, PPPoE, PPPoA, and IPoA.
Describes how to configure static routes for directing network traffic.
Explains the configuration of the RIP dynamic routing protocol for automatic route discovery.
Details the configuration of the DHCP server for automatic IP address allocation to clients.
Covers the configuration and status of the DHCP Relay module for network address management.
Guides on enabling and configuring the DNS Relay function for DNS query forwarding.
Explains how to create and manage network bridge interfaces and configure STP properties.
To Next Page
