Zte ZXV10 H100 - 4.2.7 DNS Relay

Chapter 4 WEB Configuration
4-17
4.2.7 DNS Relay
DNS Relay Configuration Interface:
DNS Server IP The DNS server IP address at the LAN side set in [Local DNS
Configuration] option. Upon configuration, you should click the <Apply> button.
DNS Server 1 and DNS Server 2 When the DNS relay function is configured, the IP
addresses of the DNS servers should be filled in the [DNS Server 1] and [DNS Server
2] boxes. Click the <Configure DNS Relay> button to complete the setting.
DNS Relay To enable the DNS relay function, click the <Enable> button. Upon
enabling of the DNS relay function, the content displayed on the button changes to
Disable.