Chapter 3 Client Settings
3-5
• An error occurs in the installation. Please check the following items in turn:
Whether the Ethernet cable between the H100 and your PC is correctly
connected.
Whether the network adapter driver on your PC is correctly installed.
Whether the indicators of the LAN interface in the H100 and the network card in
your PC are both on.
Whether the TCP/IP protocol is correctly configured in your PC.
If the IP address of the H100 is 192.168.1.1, the IP address of your PC must be
within the range of 192.168.1.2 - 192.168.1.254, the subnet mask 255.255.255.0
and the default gateway 192.168.1.1.
If you can ping through the H100 successfully, you are well prepared to access the
Internet.
To Next Page
Loading...
