ZXV10 H100 Home Gateway User Manual (Draft)
4-10
4.2.2.4 IPoA Connection
If your ISP provides the access mode of the IPoA-based static connection, you can
select the IPoA access mode. Upon configuration of the ATM-related parameters, select
the button in front of IPoA to configure the related parameters of the IPoA connection.
ATM Interface No. The configured No. follows the character string “ATM” when
an ATM interface is created, for example atm0, value range: 0.
ATM Interface IP WAN side IP address, the IP address of the ATM interface.
Next Hop IP The IP address of the gateway connecting to the WAN
interface.
To Next Page
Loading...
