Zte ZXV10 - Device Panels Overview; Front Panel Description; Rear Panel Port Identification

3
Chapter 3 Panels
3.1 Front Panel
1
2 3
Key
Name
Description
1
Running status indicator
Red: STB is in standby state.
Green: STB is running normally
Not Lit: STB is not powered ON
2
Connection status
indicator
Blinking (Green): the network connection is
normal.
Not Lit: the network connection fails or no
physical connection.
3
Infrared indicator
The green indicator flashes when the STB
receives signals from the remote control.
3.2 Rear Panel
1 2 3 4 5 6
Key
Name
Description
1
WAN
10/100M Base-T RJ45 ethernet interface, used to connect to
gateway/xDSL modem.