18
16. ZUMIMALL FAQ
① Check WiFi name and password (password cannot contain
special symbols).
② Make sure WiFi is 2.4GHz, 5GHz is not supported.
③ Please make sure the camera and mobile phone are in the
same WiFi environment when connecting, and add the camera
near the router.
1. Unable to connect network
① Remove camera from ZUMIMALL APP.
② Long press the reset button to restore factory settings.
③ Reconnect.
2. Connect to a new network
① Long press the reset button until you hear the sound of "Boogu".
② Wait for the camera status indicator to flash red slowly.
3. Reset the camera
① Charge at least 8~10 hours with a 5V/2A adapter.
② Ensure that the charging cable and power adapter can be
used normally.
③ The red light of the charging indicator is always on,
indicating that it is charging, and the indicator turns blue when
it is fully charged.
4. Can't charge
① Reduce the sensitivity of motion detection alarm.
② Check whether there is any object within the detection range
of the camera to interfere with triggering the PIR sensor.
③ Turn on "Alarm only when people appear", and use the
humanoid algorithm to filter false positives.
5. Frequently received alarm information
To Next Page
Loading...