Operating Manual – Folding bike with electric drive up to 250 W
Operating the gears
Your bike is equipped with a twist shifter that is operated by turning your wrist.
When changing gears, try not to change under load. Try to pedal in
idle so that the chain is only slightly under tension. This procedure is
necessary to protect your entire drive train, including the electric mo-
tor. These components are not designed for changing gear under
load!
Your bike is equipped with a shift indicator on the shift handle. This allows you to see at a
glance which gear you are currently in. The higher the number displayed, the smaller the
sprocket you are currently using and the lower the gear you are using.
Proceed as follows to operate your rear derailleur:
- Pedal forward
- Turn the twist grip shifter in the desired direction to engage a higher or lower gear.
Can be turned for fine
adjustment of the de-
Turn this grip to shift the
gears up and down on the
To Next Page
